Satrio, Cahyo Nugroho (2025) Analisa Pengaruh Variasi Nilai Arus Pengelasan MIG Terhadap Uji Tarik Dan Impak Baja ST37. Undergraduate thesis, Polije.
![]() |
Text (Abstract)
Abstrak.pdf - Submitted Version Available under License Creative Commons Public Domain Dedication. Download (157kB) |
![]() |
Text (Bab 1 Pendahuluan)
Bab 1 Pendahuluan.pdf - Submitted Version Available under License Creative Commons Attribution Share Alike. Download (150kB) |
![]() |
Text (Daftar Pustaka)
Daftar Pustaka.pdf - Submitted Version Available under License Creative Commons Attribution Share Alike. Download (153kB) |
![]() |
Text (Laporan Lengkap)
Laporan Lengkap.pdf Restricted to Registered users only Download (9MB) | Request a copy |
Abstract
This study aims to analyze the effect of MIG welding current variations on the tensile and impact strength of ST 37 steel. The welding process was carried out using 90A, 115A, and 125A currents with ER 70S-6 electrodes in the 1G welding position. Specimens were tested using tensile test (ASTM E8) and impact test (ASTM E23) methods. The test results showed that the 115A current produced the highest tensile strength and impact toughness values compared to the other currents. The highest average value of tensile strength was achieved at 115A current of 407.79 MPa and impact energy of 66.59 Joules with an impact price of 0.832 Joules/mm². In contrast, the 125A current experienced a decrease in mechanical value due to overheating which caused micro defects such as porosity. This study concludes that the selection of welding current greatly influences the mechanical quality of welded joints and 115A current is the optimal parameter for MIG welding of ST 37 steel.
Item Type: | Thesis (Undergraduate) | ||||||
---|---|---|---|---|---|---|---|
Contributors: |
|
||||||
Subjects: | 410 - Rumpun Ilmu Teknik > 430 - Ilmu Keteknikan Industri > 431 - Teknik Mesin (dan Ilmu Permesinan Lain) 410 - Rumpun Ilmu Teknik > 430 - Ilmu Keteknikan Industri > 445 - Teknik Material (Ilmu Bahan) |
||||||
Divisions: | Jurusan Teknik > Prodi D4 Mesin Otomotif > Tugas Akhir | ||||||
Depositing User: | Satrio Cahyo Nugroho | ||||||
Date Deposited: | 02 Jul 2025 06:59 | ||||||
Last Modified: | 02 Jul 2025 07:00 | ||||||
URI: | https://sipora.polije.ac.id/id/eprint/42816 |
Actions (login required)
![]() |
View Item |