Karakteristik Sifat Mekanis Carbon Fiber Polymer Matrix Composite Metode Manual Lay Up Vacuum Dengan Variasi Suhu Curing

Wakhid, Ahmad Tajnur Rohman (2024) Karakteristik Sifat Mekanis Carbon Fiber Polymer Matrix Composite Metode Manual Lay Up Vacuum Dengan Variasi Suhu Curing. Undergraduate thesis, Politeknik Negeri Jember.

	Text (Abstract) Abstact_Ahmad Tajnur Rohman Wakhid.pdf - Submitted Version Available under License Creative Commons Attribution Share Alike. Download (213kB)
	Text (Bab 1 Pendahuluan) BAB 1_Ahmad Tajnur Rohman Wakhid.pdf - Submitted Version Available under License Creative Commons Attribution Share Alike. Download (338kB)
	Text (Daftar Pustaka) Dafpus_Ahmad Tajnur Rohman Wakhid.pdf - Submitted Version Available under License Creative Commons Attribution Share Alike. Download (230kB)
	Text (Laporan Lengkap) Skripsi full_Ahmad Tajnur Rohman Wakhid.pdf - Submitted Version Restricted to Registered users only Download (25MB) | Request a copy

Abstract

In the field of engineering today, especially material technology, many developments and new innovations have emerged. The need for certain types of materials with certain characteristics is increasingly abundant. Composite is the mixing of two or more types of materials that have different characteristics, with the aim that the material has superior characteristics. In this study, researchers used woven carbon fiber as a reinforcement material. The advantage of carbon fiber compared to steel and iron is that carbon fiber has stronger and lighter properties. This study aims to determine the effect of curing temperature variations of 50°C, 75°C, and 100C on tensile strength and impact. Where the manufacturing process will be done by manual lay up vacuum method then curing process for 30 minutes. From the results of tensile tests that have been carried out, the highest average tensile stress results are found at a curing temperature of 100 ° obtained a tensile stress value of 268.97 N/mm2 and the lowest average tensile stress value is found at a curing temperature of 50 °C of 226.40 N/mm2 where as the curing temperature increases it shows an increase in tensile strength. From the results of impact testing that has been carried out, the highest average impact price is found at a 100°C curing temperature of 0.242 J/mm2 and the lowest average impact price value is found at a 50°C curing temperature of 0.189 J/mm2 where the impact specimen is stronger to withstand the impact load as the curing temperature increases.

Actions (login required)

View Item